IEI Technology AFL-W10A-N270, User Manual

Page: 81 / 158

AFL-W10A-N270 User Manual
Page 81

Remote Access [Disabled]
Use the
Remote Access
option to enable or disable access to the remote functionalities
of the system.

Disabled D
EFAULT
Remote access is disabled.

Enabled
Remote access configuration options shown below
appear:

Serial Port Number

Serial Port Mode

Redirection after BIOS POST

Terminal Type
These configuration options are discussed below.

Serial Port Number [COM1]
Use the
Serial Port Number
option to select the serial port used for remote access.

COM1 D
EFAULT
System is remotely accessed through COM1

COM2
System is remotely accessed through COM2

COM3
System is remotely accessed through COM3
NOTE
: Make sure the selected COM port is enabled through the Super I/O configuration
menu.

Base Address, IRQ [3F8h,4]
The
Base Address, IRQ
option cannot be configured and only shows the interrupt
address of the serial port listed above.