IEI Technology AFL-08AH-N270-CR User Manual Download Page 78

Page: 78 / 115

AFL-08AH-N270-CR Panel PC

Page 64

Suspend Mode [S1(POS)]

Use the

Suspend Mode

BIOS option to specify the sleep state the system enters when it

is not being used.

S1 (POS) D

EFAULT

System appears off. The CPU is stopped; RAM is

refreshed; the system is running in a low power mode.

S3 (STR)

System appears off. The CPU has no power; RAM is in

slow refresh; the power supply is in a reduced power

mode.

6.3.6 APM Configuration

The

APM Configuration

menu (

BIOS Menu 10

) allows the advanced power

management options to be configured.

BIOS Menu 10: Advanced Power Management Configuration

Restore on AC Power Loss [Last State]

Use the

Restore on AC Power Loss

BIOS option to specify what state the system

returns to if there is a sudden loss of power to the system.

Summary of Contents for AFL-08AH-N270-CR




















































































































Search results

Summary of Contents for AFL-08AH-N270-CR

Reviews:

Related manuals for AFL-08AH-N270-CR

Brands by name

Popular brands

IEI Technology AFL-08AH-N270-CR, User Manual

Search results

Summary of Contents for AFL-08AH-N270-CR

Reviews:

Related manuals for AFL-08AH-N270-CR

Brands by name

Popular brands