IEI Technology AFL-08AH-N270-CR, User Manual

Page: 41 / 115

AFL-08AH-N270-CR Panel PC
Page 27
The four methods of mounting the AFL-08AH-N270-CR are listed below.
Wall mounting
Panel mounting
Arm mounting
Rack mounting
The four mounting methods are described below.
4.7.1 Wall Mounting
To mount the flat panel PC onto the wall, please follow the steps below.
Step 1:
Select the location on the wall for the wall-mounting bracket.
Step 2:
Carefully mark the locations of the four screw holes in the bracket on the wall.
Step 3:
Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4:
Align the wall-mounting bracket screw holes with the pilot holes.
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (
Figure 4-3
).
Figure 4-3: Wall-mounting Bracket