45
4
If the print head kit number is not entered correctly, printer malfunctions may occur and the
warranty may be voided.
Cleaning is absolutely necessary after changing the print head. No print jobs can be run until the
cleaning operation has finished. Refer to section 3 – Maintenance to carry out cleaning.
Wait for 2 minutes after cleaning before using your printer.
CLEANING
Step 3 - Configuring the New Print Head
1. Power up the printer and check that it is properly connected to a computer on which the printer’s ID Maker Print Center is installed.
2. In
Maintenance
of ID Maker Print Center, click on the
Change print head
tab.
3. Enter the PKN number of the print head kit in
Enter PKN no.
, the number you noted down in step 2. Then click
Confirm
.
Step 4 - Cleaning the Printer
On your printer’s control panel, the “
CLEANING
” light is lit:
Once cleaning has been carried out, your printer is once again ready to customize your cards.
