p.41
NOT USE
The version of the firmware installed in the RFK505 is displayed on the LCD.
4.2
Memory Test
Memory Test allows you to test the memory of the RFK505. To begin the test, press <ENT>.
If the test is successful, the LCD will display the “TEST PASSED” message. Press any key to fini
sh the test. If the test is unsuccessful, the LCD will display the “TEST FAILED” message.
Press any key to finish the test and try again. If the problem persists, please contact your loca
l IDTECK dealer for assistance or service.
4.3
Output Test
Summary of Contents for Star RFK505
Page 1: ......
Page 22: ...Installation Checkpoints Tips p 18...
Page 44: ...Setting Changes p 40 4 NOT USE 4 1 Firmware Version...
