IDTECK Star RFK505, User Manual

Page: 15 / 51

p.11 Product Explanation
2.2 Back Panel Description
1 Initialization Switch
This switch is used to initialize Star RFK505. For initialization, press down this switch a
nd then keep it for more than 2 seconds. Refer to ‘8.2 System Initialization’ for more d
etails.
2 Communication Display LED
# 3, 4(yellow, green) LED will twinkle during RS232, RS422 and TCP/IP communicatio
n.
If the LAN is connected normally during TCP/IP communication, green LED will turn o
n. But in the collision status, the #2 LED (red) turns on.
3 Tamper Switch
If someone takes off installed Star RFK505 on the wall by force, the tamper switch is a
ctivated then buzzer makes sound.