VP5300 User Manual
Page | 36
9.3.1.
Enabling SmartPIN L100 Devices
1.
The L100 or L80 front display now shows two options:
Enable PinPad
, and
Enable CR
(in this
case, CR means "card reader"). Use the
#
and
*
keys to scroll up or down. Select
Enable CR
and
press
Enter
.
2.
Setup is now complete. Execute the
Start EMV Transaction
command in the USDK Demo, or start
a transaction from your own software, and then insert a PIN debit card. After the prompt for PIN
comes up, the unit should display “ENTER PIN:” as shown below:
Note:
The test card must be a PIN-capable EMV card. We recommend using the
appropriate test card from a deck of test cards.
