VP5300 User Manual
Page | 21
6.4.
Attaching the Cables from the Antenna to the VP5300
1.
Attach the SMB barrel end of the cable (80152236-001) from the antenna to the SMB
post of the VP5300. The connector slides on.
2.
Attach the 8-pin end of the cable (80152236-001) from the antenna to the VP5300,
where the receptacle sits next to the RJ-45 (Ethernet) receptacle.
6.5.
Connecting to Power
The VP5300 can be powered through the RS-232 communications cable or the USB Y-connector. In
either case, the VP5300 requires the +9VDC power supply to operate.
1.
Connect the +9VDC power supply (P/N 140-2035-00) to the barrel receptacle on the RS-232
cable or the barrel part of the Y-cable for USB by sliding the power supply barrel into the
receiving recess.
2.
Plug the unit in to an AC outlet and verify that the VP5300 lights up.
Note:
The VP5300 requires a power supply whether connected by RS-232 or USB.
