VP5300 User Manual
Page | 26
7.1.
Diagnostic LED Status
The LED on the
back
of the VP5300 is intended to be used for diagnostic purposes.
LED status:
1.
Off
2.
Solid – No communication with its host.
3.
Flashing (1 sec on, 1 sec off) – Communicating with its host.
LED Colors:
•
Amber – Reader requires on-site service actions.
•
Green – Reader is ready to read cards.
•
Red – Reader needs to be sent back to the manufacturer.
State
Green LED
Amber LED
Red LED
Indicating
Service action
1
Off
Off
Off
No external power.
Check the power cable and
power supply.
2
Solid Red
Power is on, but firmware doesn't
run.
Dismount the device and
send it back to the
manufacture.
3
Solid
Amber
Off
Solid amber normally means the
front removal-detection buttons
(left side of front bezel) are not
depressed.
If this possibility is ruled out,
check host connectivity.
Check that the removal
detection button is fully
depressed. Check the
communication cable and if
host is running.
4
Solid Green
Solid
Amber
Power on. First restart and no
command sent. In not ready state
and waiting for host to
communicate.
No action required.
