VP5300 User Manual
Page | 18
4.
Drill the two access holes (14.0 mm, 0.551 inch) holes using a 35/64 drill bit.
5.
Use the nuts that are supplied with the unit (in plastic bag).
6.
Route the end of the cable (80152235-001) with the RJ-45 connector through the
matching 14.0 mm (0.551 inch) hole into the kiosk. Make sure that the front of the
antenna will be properly oriented (not upside down) on the kiosk before inserting the four
screws into the mounting holes.
7.
Align the four threaded posts with their mounting holes and attach the NFC Antenna to
the mounting surface. Make sure that the cable is not pinched, rubbing, or binding.
