※
LX505/LX505SR QUICK INSTALLATION GUIDE
7
4. INSTALLATION
4.1 Wall Mount Installation
Install LX505/LX505SR as the procedure below.
1.
Position the Wall Mount to the location where you want to install the unit and mark 4 x drilling positions. Drill 6-32
holes for at least 4 mounting points.
2.
Drill a 1/2” hole on the center of the Wall Mount.
3.
Using 4 screws, install the Wall Mount to the proper location.
4.
Take out the cable through the center hole.
5.
After the wiring is done, put the LX505/LX505SR on the Wall Mount and screw it.
.
(Figure: Wall Mount)
Do not install LX505/LX505SR on a metal wall. Otherwise, the radio frequency from the metal frame will
make reading range of the card shorter.
Caution
