※
LX505/LX505SR QUICK INSTALLATION GUIDE
15
5.5.4 TCP/IP Communication Connection (Only for LX505T/LX505SRT)
Follow the instruction below for TCP/IP communication.
(Figure: TCP/IP Communication between Multiple LX505 units and a host PC)
- Connect the RJ45 plug of LAN cable from the HUB to the RJ45 jack of the LX505T/LX505SRT.
- Set a unique Communication Address of each LX505T/LX505SRT.
- Install then run the LX505T/LX505SRT application software (STARWATCH TIME PRO, LX ACCESS PRO II,
STARWATCH STANDARD).
TCP/IP Module (IIM7100A) Setting
For TCP/IP communication, set information for Network and Serial communication through TCP/IP
Module(IIM7100) setting program(IIM100A Configuration Tool).
1. Install TCP/IP Module(IIM7100) setting program, IIM100A Configuration Tool.
The Program to set network and check operation status is contained in Application software (TARWATCH
TIME PRO, LX ACCESS PRO II, STARWATCH STANDARD) CD. Install „IIM100A Configuration Tool‟ and
then set TCP/IP Module information for communication environment.
2. Network Information Setting
After TCP/IP Module(IIM7100) setting program(IIM100A Configuration Tool) is installed, run „Start‟ -
> ‟Progrm‟ -> Wiznet _C.exe.
1)
If program is normally run, this screen below is displayed.
