ZSSC4151Evaluation Kit Start-Up Guide
© 2016 Integrated Device Technology, Inc.
4
March 11, 2016
Figure 2.1 ZSSC4151 SSC Evaluation Kit Assembly
SSC Communication Board
ZSSC415x/6x/7x Evaluation Board
SSC Sensor
Replacement Board
K1 Power Enable Jumper
Pin 1
Power Indicator
2K
Ω
2K
Ω
100
Ω
TOP
BOT
BR1P
BR1N
SSC Sensor
Replacement Board
Equivalent Circuit
With the three boards assembled as shown in Figure 2.1, attach the USB cable included in the kit between the
SSC Communication Board and a USB port on a PC. In some cases, the user’s operating system detects the
board type and automatically installs a driver the first time that the SSC Communication Board is connected. For
this reason, the PC should be connected to the Internet during the first USB connection so that the operating
system can download a driver. If a driver fails to install, contact IDT for assistance.
2.2.
Software Setup
The
ZSSC4151 Application Software
provides a user-friendly graphical user interface (GUI). It is available for
. After downloading the software, extract the zip file contents.
Run the
ZSSC415xSetup.exe
file from the unzipped location to install the GUI. Launch the
ZSSC415x
program
from the Start Menu in Windows or by clicking the desktop icon created by the installation program.
To enable resizing the window, go to “SETTINGS” on the top menu and check the “No limits on resizing” as
shown in Figure 2.2.
