4
©2019 Integrated Device Technology, Inc.
July 8, 2019
Microclock
®
5X1503/5L1503 Family Development Kit User Guide
Figure 3. Development Kit Boards
The socket board for all Microclock products, combined with a USB programmer board, is used for the purpose of validation and
measurement on all outputs. The development kit offers two ways to program a configuration to either a blank part in the socket or a
blank part soldered on an evaluation board for validation. Blank parts can drop into the socket of the socket board for programming on
different MicroClock family devices. The evaluation board is another option for configuration programming so it can be brought over to
any system board for clocking support. Note that blank parts can only be burnt once through the socket board. The socket board is
bundled with a USB programmer board. The following description and images are restricted to the socket board.
On the footprint of the socket board, a pin orientation identifies the position of Pin 1 as shown in
. Align the dot of the blank part in
the socket as pointed. After placing the blank part, secure the socket cover.
Figure 4. Socket Board (pin position)
Figure 5. Evaluation Board (pin position)
Socket Board
USB Programmer Board
Evaluation Board
Pin 1 Orientation
Pin 1 Orientation
Ground Pin
Ground Pin
VDD 1.8V Pin
OTP Burn Pin
SDATA Pin
SCLK Pin
