6
©2019 Integrated Device Technology, Inc.
July 8, 2019
Microclock
®
5X1503/5L1503 Family Development Kit User Guide
Use the following steps to proceed with the OTP burn.
8. After the chip is connected to the Timing Commander, the main window of configuration is shown (see
). Click the OTP icon
on the left side of personality window.
Figure 6. Personality Main Window
9. After clicking the icon, a new dialogue window will open (see
). Set the burning protection for the desired Config/DFC to
configure the OTP Burn (default is “Burn”). Click “Burn” to proceed with the OTP burn process. Please note that this process cannot
be reverted back.
Figure 7. Burn Dialog Window
