IDS SMS Duo V2, Training Manual

Page: 6 / 16

You can also name the cell number when adding it to the SMS Duo V2.
The SMS should look like this:
1234 add master 0740492481:Sid
All phone number commands:
Action Code Command Ext. Command Data
Add phone number as a
Master number
1234 Add Master 074 049 2481
Add phone number as
an Arm number
1234 Add Arming 073 917 0759
Add phone number as a
Reporting number
1234 Add Reporting 071 348 9467
Add and name phone
number as a Master
1234 Add Master 074 049 2481:Sid
Deleting a phone
number
1234 Delete 074 049 2481
2.3. Reporting
Each phone number can turn reporting off, as well as choose how they want to receive
reporting messages.
On/Off – Enables/Disables reporting to the phone.
Global – All enabled global events. Eg. System Trouble.
P1 – Events that are alarm based. Eg. Arm/Disarm.
P2 – Reports SMS Duo v2 onboard zones 9 & 10.
Type – Enables the type of reporting that the phone number will receive.
There are three types to choose from:
Raw – A contact ID string is sent to the phone.
Full – All enabled events will be sent to the phone in English.
Reduced - Only the following will be reported: Arm/Disarm, Zone violations, Panics,
System Troubles. (This is the default)
Minimal - Only the following will be reported: Zone violations, Panics, System Troubles.
To turn on reporting for partition 1 and global you will use the following information:
Code – 1234 (a user code)
Command – Report
Extended Command – On P1, global
Data – 074 049 2481 (the number or cell name to receive the reporting SMSes)
The SMS should look like this:
1234 report on p1,global 0740492481
To change reporting to full you will use the following information:
Code – 1234 (a user code)
Command – Report
Extended Command – Type
Data – Full Sid