IDS SMS Duo V2, Training Manual

Page: 10 / 16

To check the zone status of partition 3 you will use the following information:
Code – 1234 (a valid user code in partition 1)
Command – Zone
Extended Command – Status
Data – P1 (Partition number or name)
The SMS should look like this:
1234 zone status p1
The SMS Duo V2 will reply as follows if zone 3 is bypassed and zone 6 is violated:
“IDS SMS. P1 disarmed.
Z03: bypassed.
Z06: violated.”
To check the bypass status of zone 1 you will use the following information:
Code – 1234 (a valid user code in partition 1)
Command – Bypass
Extended Command – Status
Data – 1 (Zone number)
The SMS should look like this:
1234 bypass status 1
To check the PGM status of PGM 2 you will use the following information:
Code – 1234 (a valid user code in partition 1)
Command – PGM
Extended Command – Status
Data – 2 (PGM number)
The SMS should look like this:
1234 pgm status 4
All status commands:
Action Code Command Ext. Comm Data
Retrieve the status of all partitions 1234 Arm Status All
Retrieve the status of P1 1234 Arm Status P1
Retrieve the status of P1 & P2 1234 Arm Status P1,P2
Retrieve the status of zones in
partition 1
1234 Zone Status P1
Retrieve the status of zones in
partition 1 & 3
1234 Zone Status P1,P3
Get PGM 8’s status 1234 PGM Status 8
Get PGM Gate’s status 1234 PGM Status Gate
Retrieve bypass status of zone 1 1234 Bypass Status 1
Retrieve status of “Lounge” 1234 Bypass Status Lounge
*Remember you can only operate PGM 1 & 2 on the SMS Duo v2 Module. You cannot operate
the 805 PGMs.