IDS LCD Digital Keypad, User Manual, Page: 19 / 32

19
IDS LCD Keypad User Manual 700-292-01C Issued March 2009
Table 4 : User Code Properties
Zone LED Property 816 1224 1632
1 Master User X X X
2 Duress Code X X X
3 Arm to Disarm Code [Maid‟s Code] X X X
4
Group Arm (Global Arm /Disarm for 816)
X X X
5 Group Disarm X X
6 Arm Code X X
7 Disarm Code X X
8 Report User Open Close X X
9 User Phone in Access X X
10 Report User Access X
11 Enable Anti-pass back for User X
12 Fire Code X
Explanation of User Code Properties
8.3.5.1 Master User
When assigned to a user, this property allows the user to act as a Master User.
8.3.5.2 Duress Code

This is a special 4 (default) or 6 digit user code (check the code length with your installer) and
should only be used in the unique situation where an intruder forces one to disarm the system
"under duress".

When the [DURESS CODE] is entered, the control panel disarms normally - however a DURESS
REPORTING CODE is transmitted to the monitoring company to inform them that you have been
forced to disarm the control panel by an intruder.

It is advisable to choose a code that can be easily remembered by all family (or staff) members.
8.3.5.3 Maid's Code
This code may be used to limit access to the premises. A maid's code will only disarm the system if the
same code was used for arming. If armed with a code other than this code, the system will view an
attempt to disarm using a maid's code as an invalid entry. Any valid user code will disarm the system if it
has been armed with a maid‟s code.
8.3.5.4 Global Arm / Disarm Code
(Not applicable to the IDS 1224 & IDS 1632)
This code when entered will either arm or disarm the partitions assigned to that user depending on their
status. If both partitions are disarmed, entering a global code will arm both partitions. If both partitions are
armed, entering a global code will disarm them. In the case where one partition is armed and the other