(C) IDM Energiesysteme GmbH
5. General description
Installation instructions AERO ILM
22
Installation
0DMRUIDFWRUVRILQÀXHQFHDUH
• sound attenuation by massive barriers e.g. buil-
GLQJVZDOOVRUGLႇHUHQWWHUUDLQ
UHÀHFWLRQRQDFRXVWLFDOO\KDUGJURXQGHJJODVV
facade and stone surfaces
• attenuation due to sound absorbing porous sur-
faces e.g. grass, trees
• reinforcement/reduction of by wind speed/direction
Noise-Immission
The noise caused by an source at a certain place is
expressed as Immission, the corresponding sound
pressure level is called Immission level.The immissi-
on level at the relevant place of immission can either
be determined by measurements or calculation e.g.
forecasting method according „TA Lärm“ (German
1RLVH 3UHYHQWLRQ &RGH HVSHFLDOO\ ZKLFK LV HVSH
-
cially useful at the stage of planning.
According to this method of calculation, the expected
sound pressure level is calculated on the basis of the
sound power level of the heat pump, the distance
of the heat pump to the receiver location and the
installation situation (directivity correction Dc) of the
relevant place of immission according the following
formula:
2: Spherical spreading into 1/4 space
1: Spherical spreading into 1/2 space
3: Spherical spreading into 1/8 space:
L
WAeq
PHDQ$ZHLJKWHGVRXQGSUHVVXUHOHYHO>G%@
D
&
GLUHFWLRQDOLW\FRUUHFWLRQ>@
S
m
GLVWDQFHIURPQRLVHVRXUFHWRUHFHLYHU
ORFDWLRQ>P@
7KH IROORZLQJ ¿JXUHV VKRZ WKH GLႇHUHQW LQVWDOODWLRQ
situations of heat pumps and the corresponding di-
rectivity correction.