1
2
3
4
5
6
7
8
9
10
11
12
13
T
H E
P O W E R
F A M I L Y
(C) IDM ENERGIESYSTEME GMBH
Installation TERRA S/W
5
1
General information
Genera
l i
n
forma
ti
on
1.10. Installation Room
1.11. Protection of the environment
1.12. Standards and directives
General instructions on operating the heat
pump.
Important instructions on assembling and
operating the heat pump. It is imperative
that these are observed.
General instructions on assembling the heat
pump.
Space for customer service
telephone number
Heatpumps are electrical equipment
made from high valuable materials,
which are not allowed to be disposed
like normal household garbage, but
have to be disposed professional and
proper according the regulations of the
local authorities.
A non-proper disposal can cause, apart
from sanctions for the violator, environ-
mental damages and harm for your
health.
-
The TERRA heat pumps should be
installed in a frost-proof room. (Room
temperature should be between 5°C
and 35°C)
-
In case of a fl oating fl oor screed the screed and
the sound damping around the heat pump have
to be omitted.
-
Heat pumps should not be installed in wet rooms
or in potentially dust or explosion-endangered
rooms.
-
Gas from refrigerants in plant rooms must not es-
cape into vicinal rooms, stair rooms, courtyards,
walks or into the drainage system of the building.
The gas has to be channelled off safely.
-
In case of danger, the plant room has to be eva-
cuated immediately.
-
For powering off the cooling facility, a remote
power-off switch has to be installed nearby the
door of the plant room.
-
In case a natural ventilation is not possible, a
mechanical ventilation has to be provided. A
mechanical ventilation has to be equipped with
an independent emergency control outside of the
machine room near the door.
Note for the installation of the heatpump
follow all effective national and inter-
national piping- and installation rules
same as rules for accident prevention and
safety regulations when installing pipeline
systems and electrical components and
equipment as well as the instructions of
this Installation instruction.
Thereto belongs among other things:
- the general effective rules for accident prevention
and safety regulations
- the regulations for environmental protection
- the provisions/regulations of the professional asso-
ciations.
- the effective laws, standards, guidelines and regu-
lations e.g. DIN,EN,DVGW,VDI and VDE
- regulations of the local suppliers/supply companies
