IDK NJR-TW01UHD, User Manual

Page: 34 / 56

NJR-TW01UHD/NJR-RW01UHD User Guide
34
8.3 Setting items
Some setting items can be controlled through command/GUI operation; the others cannot be controlled.
[Table 8.1] Setting items
Command: Command input, GUI: GUI operation, WEB&C: WEB browser and command input, No: Not supported
Setting items
NJR-TW01UHD
NJR-RW01UHD
NJR-CTB
Page LAN
(IP-NINJAR
Configurator)
LAN
No-signal input monitoring Command WEB&C 37
HDCP input enabled/disabled Command WEB&C 38
Output mode Command
WEB&C
39
HDCP output Command WEB&C 39
Hot plug ignoring duration Command WEB&C 40
Muting digital audio Command
WEB&C
41
Selecting output audio
GUI WEB&C
42
EDID resolution Command WEB&C 43
Copying EDID Command WEB&C 45
Selecting WXGA mode Command
WEB&C
45
Deep Color Command
WEB&C
46
Audio format Command WEB&C 46
Speaker configuration Command
WEB&C
47
RS-232C communication GUI
WEB&C
48
LAN GUI WEB&C 49
MAC address GUI WEB&C 49
Input status Command WEB&C 50
Output status Command
WEB&C
51
Monitor EDID Command
WEB&C
52
Version Command
WEB&C
53
Initialization GUI WEB&C 35
Reboot GUI WEB&C 35
Selecting channel information*
No WEB&C
-
Selecting I/O channel*
No WEB&C
-
Operating preset memory*
No WEB&C
-
Videowall* No WEB&C -
RS-232C crosspoint* No WEB&C -
NJR-CTB LAN*
No WEB&C
-
*: In this manual, only settings of the NJR-W01UHD is explained.
Refer to NJR-CTB User Guide for the following operations: Using as Network Extender base on 10GbE
Switcher, setting channel information, selecting input/output channel, operating preset memory, setting
videowall, setting crosspoint, and setting NJR-CTB LAN.