NJR-TW01UHD/NJR-RW01UHD User Guide
45
Communication command
@SVF
Setting EDID resolution
@GVF Getting EDID resolution
9.4.2 Copying EDID
EDID of the sink device connected to NJR-TW01UHD or NJR-RW01UHD can be loaded and registered, and
the copied EDID can be treated in the same way as the internal EDID.
In order to copy the EDID of the sink device connected to NJR-RW01UHD, set this item from the IP-NINJAR
Configurator or NJR-CTB.
Communication command
@RME Copying EDID
【
See: 8.1 Controlled by IP-NINJAR Configurator
【
See: 8.2 Controlled by NJR-CTB
Note:
To use a registered EDID, set “
” to Copied EDID
9.4.3 Selecting WXGA mode
You can set the WXGA pixel (1360x768 or 1366x768) depending on the resolution of EDID.
This setting is enabled if selecting an item other than copied EDID.
Setting value
1360x768 [Default]
1366x768
Communication command
@SWX Setting WXGA mode
@GWX Getting WXGA mode
NJR-TW01UHD
NJR-TW01UHD
