NJR-TW01UHD/NJR-RW01UHD User Guide
37
9.1 Setting input
9.1.1 No-signal input monitoring
If you change the EDID settings of the NJR-TW01UHD or power the NJR-TW01UHD off/on, the source device
may not output a video signal. Use this menu to set the monitoring time. This is the interval beginning when a
source device is not outputting a signal; and ending at the point when the NJR-TW01UHD requests an output
from that source device.
Changing EDID
ON
OFF
Requesting source device to
output video signal
Monitoring
Hot plug
ON
OFF
Video signal from
source device
[Fig. 9.1] Monitoring absence of input
Setting value
OFF
2 to 15 [sec.] [Default] 10 [sec.]
Notes:
If you are using the monitor power-saving or dual monitor features on your PC, set this feature to “OFF”.
This will avoid potentially unpredictable operation.
When using this feature, ensure that the “monitoring time” is set for a value greater than the amount of time
needed for the source to provide an output signal.
[Fig. 9.2] Repeating output reset
Communication command
@SDT
Setting the no-signal input monitoring
@GDT Getting the no-signal input monitoring
NJR-TW01UHD
Changing EDID
Monitoring
ON
OFF
Monitoring
Monitoring
Outputting source device
’
s video
Video signal from
source device
Requesting source device to output signal
