NJR-TW01UHD/NJR-RW01UHD Command Guide
40
@GSS
I/O status (Cont’d)
Parameter
*7 For status of the HDMI output connector, one of the codes below will be returned
in the following order: video output/audio output.
Error code
Video output status
Audio output status
0
Video is output correctly.
Audio is output correctly.
1
－
” is set to “ON”.
2
No source device is connected.
3
No video signal is input.
No audio signal is input.
4
Video output or audio output of the source device is muted.
5
Signal with HDCP is input but the sink device does not support
HDCP.
6
The source device does not output the needed information
(packets) for outputting video or audio.
7
Signal that is not supported by
NJR-W01UHD is input.
Since compressed audio is
input, audio cannot be output.
9
－
The sink device that does not
support audio is connected.
B
No sink device is connected.
C
HDCP is being authenticated.
D
HDCP authentication failed
Getting
example
Command
Response
@GSS,1,1,1,0
@GSS,1,1,1,0,H30,1920 x 1080p 60Hz,LINEAR PCM 48kHz, HDCP 1.4 ON
Description Getting all input statuses of NJR-TW01UHD Channel 1
- Input signal type : 30-BIT COLOR HDMI signal
- Video input signal : 1080p 60Hz
- Audio input signal : LPCM 48kHz
- HDCP : 1.4
Getting
example
Command
Response
@GSS,2,1,1,10
@GSS,2,1,1,10,HDCP 1.4 SUPPORT, H30,00
Description Getting all output statuses of NJR-RW01UHD Channel 1
- HDCP authentication : HDCP 1.4
- Output signal type : 30-BIT COLOR HDMI signal
- Error code : Video and audio are output correctly.
Remarks
－
