NJR-TW01UHD/NJR-RW01UHD Command Guide
23
4.5.2.2 Setting output
@GDM / @SDM
Output mode
Getting
Command
@GDM, device, ch, reserved
Response
@GDM, device, ch, reserved, mode_1 (, mode_2)
Setting
Command
@SDM, device, ch, port, mode
Response
@SDM, device, ch, port, mode
Parameter
device: Model
1 = NJR-TW01UHD, 2 = NJR-RW01UHD
ch: Channel
1 to 512 = Channel 1 to Channel 512
If a command is input from the IP-NINJAR Configurator, “1” is set (fixed).
reserved: Reservation
“1” fixed
port: Output connector
NJR-TW01UHD:
0 = All outputs, 1 = Output connector for extension,
2 = HDMI output connector
NJR-RW01UHD:
1 = HDMI output connector
mode_1 to mode_2, mode: Output mode
0 = AUTO [Default], 1 = DVI output, 2 = RGB output,
3 = YCbCr4:2:2 output, 4 = YCbCr4:4:4 output, 5 = YCbCr4:2:0 output
NJR-TW01UHD:
mode_1 = Output connector for extension, mode_2 = HDMI output connector
NJR-RW01UHD:
mode_1 = HDMI output connector
Getting
example
Command
Response
@GDM,1,1,1
@GDM,1,1,1,0,4
Description Getting the output mode of the NJR-TW01UHD Channel 1
Output connector for extension : AUTO,
HDMI output connector : YCbCr4:4:4 output
Getting
example
Command
Response
@GDM,2,1,1
@GDM,2,1,1,0
Description Getting the output mode of NJR-RW01UHD Channel 1
AUTO
Setting
example
Command
Response
@SDM,1,1,2,4
@SDM,1,1,2,4
Description Setting the output mode of Channel1’s HDMI output connector (NJR-TW01UHD) to
YCbCr4:4:4 output
Completed
Remarks
－
