MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide
83
9.10 EDID (Extended Display Identification Data)
You can set or customize EDID to be sent to the source device. Change the setting as needed.
■
Setting EDID
Step 1 If you use copied EDID, copy the target EDID from the sink device.
Step 2 Set the EDID that will be sent to the source device.
Step 3 If you use built-in EDID, customize the data as usage.
LCD
External EDID OUT2B
Blu-ray player
Step.1
Step.2
IN 1
-
IN 8
Copied EDID 1
Copied EDID 2
Copied EDID 3
Copied EDID 4
Copied EDID 5
Copied EDID 6
Copied EDID 7
Copied EDID 8
Step.3
Changing audio format
Changing Deep Color input
Changing speaker configuration
Changing PC resolution
Changing AV resolution
Built-in EDID
-
OUT 1A
OUT 2B
External EDID OUT2A
External EDID OUT1B
External EDID OUT1A
[Fig. 9.19] Setting EDID (MSD-802UHD)
9.10.1 EDID
Menu Top
→
EDID
→
EDID DATA
Setting for Each input channel (only digital input)
Setting value
・
INTERNAL EDID [Default]
・
OUT1A MONITOR
・
OUT1B MONITOR
・
OUT2A MONITOR
・
OUT2B MONITOR
・
COPY DATA1 to COPY DATA8
You can set the EDID to be sent to the source device from built-in EDID (“INTERNAL EDID”), connected sink
device’s EDID (“MONITOR”) and copied EDID (“COPY DATA”).
EDID copied from a sink device will be displayed if any.
The setting of this menu is not updated until the MENU/SET key is pressed. Make sure to press the
MENU/SET key to update the setting.
【
