MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide
79
9.9.5 Lip sync
Menu Top
→
AUDIO
→
OUTPUT LIP SYNC (Output side) / INPUT LIP SYNC (Input side)
Setting for Output side
: Each output channel (Common to OUTA / OUTB)
Input side
: Each input channel, each input signal
Setting value 0FRAME to 8FRAME [Default] 0FRAME
You can adjust the gap between video (motion) and audio (sound).
Up to eight frames can be set for each input/output channel.
If sampling frequency is 192 kHz and vertical synchronous frequency is 24 Hz / 25 Hz / 30 Hz, the total
maximum value of lip sync input / output channel.
[Table 9.10] Lip sync maximum value
Sampling frequency
Vertical synchronous
frequency
Lip sync maximum
value
192 kHz
24 Hz
Up to 8 frames
*
25 Hz
Up to 8 frames
*
30 Hz
Up to 10 frames
*
Other conditions
Up to 16 frames
*
Up to 8 frames can be set for input / output channel lip sync, but lip sync is
limited to the maximum value.
9.9.6 Sampling frequency
Menu Top
→
AUDIO
→
SAMPLING FREQUENCY
Setting for Each output channel (Common to OUTA / OUTB)
Setting value
・
AUTO-A [Default]
・
AUTO-B
・
192kHz
・
96kHz
・
88.2kHz
・
48kHz
・
44.1kHz
・
32kHz
You can set the sampling frequency of digital audio output.
■
“AUTO-A” or “AUTO-B”:
Outputting digital audio at the maximum sampling frequency supported by the sink device that is connected to
OUTA (HDMI for AUTO-A) or OUTB (HDBaseT for AUTO-B).
At this time, the sampling frequency that is actually output is displayed in parentheses. In case EDID cannot
be read from the sink device, the sampling frequency that was used the last time is selected with “*” on its
right side.
[OUT1 FREQUENCY]
A
UTO-A(48kHz)
[OUT1 FREQUENCY]
A
UTO-A(48kHz)*
Maximum sampling frequency
Sampling frequency used last time
