MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide
121
■
From browser
You can capture and save an input video through a WEB browser as well.
Step1) If the memory area is divided, select the registered area of the captured image.
Step2) Set “FREEZE” to “ON”. You can skip this step. This freeze is only temporary. If input channel is
switched or input signal changes, the freeze is released and the input video will be output.
Step3) Click the “CAPTURE” button to display the dialog box. Click the “OK” button of the dialog box to
capture the video. If you skip the Step2, the video freezes automatically just after clicking the “OK” button.
【
①
Select the registered area of the captured video (for memory
area division).
②
Select the freeze of input video. (You can skip this step)
③
Start the capture by clicking the
“
CAPTURE
”
button.
①
②
③
[Fig. 9.35] WEB menu
.
When capture completes correctly, the message is displayed. Click the “OK” button of the dialog box to
complete
Do not operate the WEB menu or turn off the MSD until the registration completes.
If capture does not start correctly or failed, an error message below will be displayed.
[Table 9.38] Capture error message
Error message
Description
Video Capture is not available
because there is no input signal.
Since input video is not displayed, the video cannot be captured.
Memory Size Error is happened.
Since this input video data is larger than reserved memory area, it
cannot be saved.
