MSD-701UHD / 702UHD / 801UHD/ 802UHD User’s Guide
69
9.8 Output settings
9.8.1 Output mode
Menu Top
→
OUTPUT SETTING
→
OUTPUT MODE
Setting for Each output channel (Each OUTA / OUTB)
Setting value
・
HDMI YCbCr 4:4:4 MODE [Default]
・
HDMI RGB MODE
・
HDMI YCbCr 4:2:2 MODE
・
DVI MODE
・
HDMI YCbCr 4:2:0 MODE *only OUTA
You can select an output signal mode and color space of the output video. The MSD outputs selected mode,
however, if the connected sink device has optimal output mode and color space, the MSD outputs optimal
output mode signal for the connected sink device.
“HDMI YCbCr 4:2:0 MODE”: YCbCr 4:2:0 has priority if the resolution is 4K@60 / 59.94 / 50 while YCbCr
4:4:4 has priority for other resolutions.
Higher priority
HDMI YCbCr 4:4:4 MODE
HDMI YCbCr 4:2:2 MODE
HDMI YCbCr 4:2:0 MODE
HDMI RGB MODE
Lower priority
DVI MODE
Notes:
・
If “DVI MODE” is selected and the output resolution is 2160p@30 or lower, the MSD outputs DVI signals.
For other resolutions, it outputs signals at the appropriate mode of the connected sink device.
・
Only TV resolutions (480i, 576i, 720p, 1080i, 1080p, and 2160p) can be output in ”HDMI YCbCr 4:4:4 MODE”
or “HDMI YCbCr 4:2:2 MODE”. PC resolutions are output in “HDMI RGB MODE” or “DVI MODE”.
・
Since OUTB (HDBaseT output connector) does not support YCbCr 4:2:0, ”HDMI YCbCr 4:2:0 MODE”
cannot be selected.
9.8.2 Synchronous signal output with no input video
Menu Top
→
OUTPUT SETTING
→
SYNC OUTPUT
Setting for Each output channel (Common to OUTA / OUTB)
Setting value ON [Default], OFF
You can set whether synchronous signals are output when no video signals are input from the selected input,
or when “OFF” is selected for the input. If you set this menu to “ON”, you can prevent the sink device from
being switched to the standby mode.
