IDK GF-100, User Manual

Page: 62 / 65

GF-100 User
’s Guide
62
Setting item Page Menu Set value Default
Test tone: output channel P.45
TEST PATTERN → TONE CH
CH1-CH8
CH1-CH2
CH1 to CH8
CH1-CH2
Test tone: standard level P.46
TEST PATTERN → TONE LEVEL
-20 dBFS, 0 dBFS -20 dBFS
Recording item P.49
TOP → DDC MONITOR → HP/DDC LOG
TOP → DDC MONITOR → EDID LOG
TOP → DDC MONITOR → HDCP LOG
TOP → DDC MONITOR → OTHERS LOG
OFF, ON ON
Beep sound P.49
TOP → DDC MONITOR → BUZZER
OFF, ON ON
DDC monitor escape
sequence
P.49
TOP → DDC MONITOR → ESCAPE CODE
DISABLE, ENABLE ENABLE
Test signal resolution P.55
CABLE TEST → RESOL.
480p@59.94Hz to
1080p@59.94Hz
1080p @59.94Hz
The amount of test data P.55
CABLE TEST → AMOUNT
5% to 100 % 5%
Test signals color depth P.55
CABLE TEST → COL.DEPTH
8 bit
10 bit
12 bit
8 bit
Waiting time for starting pixel
scan
P.56
CABLE TEST → CAPT.WAIT
500ms to 30000ms 2000 ms
Starting measurement P.56
CABLE TEST → START
MANUAL, AUTO MANUAL
Requesting input signals P.57
SETTINGS → VIDEO INPUT → SIGNAL
REQUEST
OFF, 1 sec to 30 sec 20 sec
Input DC balance P.57
SETTINGS → VIDEO INPUT → RECV OFFSET
DISABLE, ENABLE DISABLE
HDCP enabled/disabled P.57
SETTINGS → VIDEO INPUT → HDCP INPUT
ACTIVE, INACTIVE ACTIVE
Input bus reset time P.58
SETTINGS → VIDEO INPUT → BUS RESET TIME
OFF, 1ms to 800ms 200ms
Outputting signals forcibly P.58
SETTINGS → VIDEO OUTPUT → FORCED OUT
OFF, ON OFF
Setting current P.58
SETTINGS → CLOCK
- -
IP P.59
SETTINGS → LAN → IP ADDRESS
- 192.168.001.199
Default gateway P.59
SETTINGS → LAN → GATEWAY ADDR.
- 192.168.001.001
Subnet mask P.59
SETTINGS → LAN → SUBNET MASK
- 255.255.255.000
Time for turning off backlight P.60
SETTINGS → OTHERS → BACKLIGHT OFF
DISABLE, 1 sec to 600
sec
DISABLE
Beep sound P.60
SETTINGS → OTHERS → BUZZER
OFF, ON ON
Resume P.60
SETTINGS → OTHERS → RESUME
OFF, ON
5min to 120weeks
ON
Version P.60
SETTINGS → OTHERS → FIRM VER.
- -
SETTINGS → OTHERS → BOAD VER.
- -
SETTINGS → OTHERS → FPGA VER.
- -