FDX-16 User
’s Guide
22
6.2 Selecting I/O channel
You can select I/O channels using INPUT SELECT and OUTPUT SELECT keys. If you want to select an input
channel first, select
“INPUT
→
OUTPUT
” mode; in the opposite case (you want to select output channels first),
select
“OUTPUT
→
INPUT
” mode.
If you do not operate these keys for 60 seconds, the power saving function
will be enabled.
【
Reference:7.9.3 Power saving [POWER SAVE]
6.2.1 Selecting I/O channel in
INPUT→OUTPUT mode
Selecting an input channel first and then selecting output channels:
Selecting I/O channel
in INPUT
→OUTPUT mode
2
1
INPUT SELECT
1
2
3
4
5
6
ALL
7
8
OUTPUT SELECT
9
10
11
12
13
14
15
16
1
2
3
4
5
6
OFF
7
8
9
10
11
12
13
14
15
16
V&A
VIDEO
AUDIO
SWITCHING MODE
MENU/SET
ESC
SELECT MODE
OUTPUT
INPUT
PRESET
OUTPUT
INPUT
LOAD
4
3
*Notes for channel selection
:
● Channels that do not have a slot board cannot be selected.
● The selected output channels can be OFF (no signal) by pressing the “OFF” key.
● The selected input channel can be output to all output channels by pressing the “ALL” key..
Procedure
1
Select the desired mode by pressing the SWITCHING MODE key.
(LEDs of input and output channel keys that corresponding to the selected mode will be turned on.)
2
Select
“ INPUT
→
OUTPUT
” mode by pressing the SELECT MODE key.
(The LED of the SELECT MODE key will be turned off.)
3
Select an input channel by pressing an INPUT SELECT key (
“1“ to “16” or “OFF”).
(LEDs of the currently selected output channels will be turned on.)*
4
Select output channels by pressing OUTPUT SELECT keys (
“1“ to “16” or “ALL”).*
