FDX-16 User
’s Guide
31
7.2 Setting input [INPUT SETTING]
7.2.1 [INPUT EQUALIZER]
If you select
“AUTO”, signals are corrected automatically depending on the amount of signal attenuation.
Using menu
INPUT SETTING → INPUT EQUALIZER
For
Each input connector (IN1 to IN16)
Set value
AUTO: Automatic correction [Default]
OFF: Without correction
Notes:
If you do not press the
“SET” key, the setting is not changed.
If you use a 5 m/16.4 ft. or longer cable, we recommend testing the configuration beforehand since it is
greatly affected by the quality of the output signals and the like.
Set this menu before operating the FDX, since the image may be disturbed when the setting is switched.
A channel that does not have its digital input slot board cannot be selected in this menu.
