Part 1 - Getting Started
17
Status
Refer to the
for basic
information on using the Setup menus.
Event Status
This screen displays an overview of all events.
When an event occurs, the corresponding channel
flashes for 5 seconds.
Alarm-In
Check Alarm-In
Motion
Video Loss
Video Blind
Text-In
•
Panic Record
: Displays event status based on current
Panic Record status.
•
Check Recording
: Displays event status based on
System Monitoring
settings. For more information,
refer to the
.
•
Fan Error
: Event is indicated when the cooling fan
cannot reach a certain RPM or fails for longer than 50
seconds.
•
No Storage Found:
It will be highlighted when no
recordable storage device has been found.
•
Disk Almost Full
/
Disk Full
: If the storage device is
not in
Recycle
status, event status is displayed when
the amount of disk space specified under
System
Monitoring
is reached and when the disk becomes
100% full. For more information, refer to the
.
•
Disk Config Change
: It will be highlighted when
the DVR reboots after the hard disk drive has been
replaced.
Storage
Indicates each disk’s status.
Configure Disk Bad and Disk Temperature settings under
Setup
>
System
>
System Event
.
