Part 2 - Configuration
45
PTZ
•
Product:
You can select the PTZ camera you wish to
configure.
•
ID:
You can assign IDs to each camera by highlighting
the box under the ID heading. Change the number
by highlighting it and using the Up and Down arrow
buttons to increase and decrease the number. The
PTZ ID number can be set from 0 to 256.
<RS232/RS485>
<UTC>
•
Mode:
Select
None, UTC, RS232,
or
RS485
. UTC is
only used for HD and Full HD cameras.
•
You will need to connect the camera to the RS232 or
RS485 connector on the back of the DVR following the
camera manufacturer’s instructions.
Configure the port’s setting based on the PTZ camera
manufacturer’s instructions.
