Part 2 - Configuration
84
●
Title
: Designate a name for the alarm-out event
●
Reverse Relay
: Reverse the alarm-out type of the
device you set at the source.
Alarm-Out_Schedule
Click the + icon at the bottom left corner of the screen
to add a schedule.
You can apply different schedules for different
Day
s of
the week.
Select icon to delete the schedule.
●
Dwell Time
: Select a value between 5 secs and 15
mins as the alarm-out duration.
●
Title
: Designate a name for the alarm-out.
●
Range
: Change the schedule time frame.
●
Mode
: Select
Event
,
On
, or
Off
.
Event
Generates an alarm-out when an event
occurs.
On
Alarm-out is always on.
Off
Alarm-out is always off.
●
Channels
: Configure alarm-out port and beep
settings.
Remote Control
●
Port
: Select
None
,
RS232
or
RS485.
Click the
Setup
button and then select the correct
Baud Rate
,
Parity
,
Data Bits
and
Stop Bits
for the device you are
connecting to the NVR. You can select the device from
the
Remote Control Product
list. If the
RS232
port
and RS485 port are in use for PTZ control, networking
or text input, the remote keyboard cannot be
configured. A warning message window will appear
when other devices are using the same port, such as
PTZ control, networking or text input. The message
warns that you cannot use another device because
the ports overlap.
