Part 2 - Configuration
43
Self-Diagnosis
Use this option to configure self-diagnostic settings.
This feature is also supported when connected to the
NVR from a remote program.
●
Reports
–
No.
: Selects which reports to export.
–
Time
: Displays when you started the self-diagnosis.
–
View a Report
: Briefly displays whether the report
is “Good” or “Bad”.
–
:
Click the + icon at the bottom left corner of
the screen to run the self-diagnosis
.
–
Export
: Saves the Saves the reports to a storage
device, such as the USB port and NetFS site, by
converting them to HTML format. You can export
more than one report at a time by selecting
multiple reports.
●
Set up
Auto Generating Interval and Check IP
Duplicate.
–
Auto Generating Interval
: Set the interval to
automatically generate self-diagnosis report.
–
Check IP Duplicate:
Check if there are IP address
conflicts of WAN, VIN, camera.
•
These settings can be periodically checked for IP
duplication, but Camera IP duplication checks have
a long verification cycle, so you can run a self-
dignosis to check the results immediately .
•
Check IP duplicate funcion can only be checked on
the VIN network.
•
The reports are stored in up to 24 files. If you
have configured
Auto Generating Interval
as
one-day period, only the reports from the last
24 days can be viewed.
•
If the NVR is turned off, the reports will
automatically turn off.
•
The reports are organized by recent date and
time.
●
FailOver:
When a problem is detected on the target
device, click the
Run the failover button
to resolve
the problem.
–
Target Device.
: Selects which device to run the
failover.
–
Channels
: Select the camera channel if a camera is
set to the target device.
–
Action
: Select the type of action to run the failover.
–
Run the failover
: Click the
Run the failover
button when a fail is detected on the target device
to resolve the problem.
Once
Run the failover
have made to the camera, the
camera will reboot automatically.
Once you have run failover on the camera, the camera
will reboot automatically. By selecting
System,
Network, Device Health Status, Storage Status,
Camera Status
or
VA Box Status
, you can see the brief
results of the self-diagnosis for the target device.
The NVR
self-diagnostic report
can only be viewed in
text form.
This feature is also supported when connected to the
NVR from a remote program.
We recommend clicking the
Export
button at the
bottom of the list, which allows you to view the reports
on a PC web browser. We also recommend scanning
the self-diagnostic report on a remote program, which
allows you to view the reports in HTML format as shown
below.
