Idis DR-6316PS, Operation Manual

Page: 74 / 136

Part 2 - Configuration
74
Video-Analytics_Line Crossing
● No.
: Select which cameras to apply Line Crossing to.
● Line : Set a line to raise an event when crossing the
line. Line can be set to one-way or two-way directions.
●
Ignore Condition : Set the condition to ignore them
when the events occur.
– Ignore Condition : The system does not produce
event log entries or issue remote notifications
regarding event for the spcified time after the initial
event was detected. Set the value between 1 sec
and 5 secs or choose Never.
Ignore Condition does
not affect Line Crossing recording.
– Use Ignoring Time : Crossing Line function will be
disabled during the specified time.
● Actions
: Specify which actions to take when
Tampering is detected.
–
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to
Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out : Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, Push, FTP, and/or Alert Window.
–
PTZ
: Moves the PTZ camera to a specific preset
position when an event occurs.
– Event Monitoring: Selects the cameras to monitor
when an event occurs.
In order to use the Callback feature, the NVR must
be registered on the remote program.
Video-Analytics_Object Detection
● No.
: Select which cameras to apply Object Detection
to.
● Detection Subject
: Set an object to be detected. You
can choose either All / Human / Car / Human or Car. In
case of All, objects other than people and cars are also
detected.
● Area
: Set an area to detect objects.
● Ignore Condition : Set the condition to ignore them
when the events occur.
– Ignore Condition : The system does not produce
event log entries or issue remote notifications
regarding event for the spcified time after the initial
event was detected. Set the value between 1 sec
and 5 secs or choose Never.
Ignore Condition does
not affect Object Detection recording.
– Use Ignoring Time : Object Detection function will
be disabled during the specified time.