Part 2 - Configuration
61
●
Line Delimiter
: Designate a string to mark the end of
a line. You can enter control strings by selecting
and then entering ^, followed by a letter. For example,
Carriage Return is ^M and Line Feed (new line) is ^J.
●
Ignore String
: Specify a string to ignore from
transaction records.
●
Case Sensitive
: Ignores case in strings designated
under
Transaction Start
,
Transaction End
,
Line
Delimiter
, and
Ignore String
.
Case Sensitive
does not apply to control strings.
●
Time Out
: Once
Time Out
has been enabled, the
system will assume the end of a transaction if no new
string is entered within the specified duration of time.
Select between 5 secs and 15 mins.
Selecting RS-232, RS-485, USB-Serial 1 through 8, or LAN
1 through 16 as the port activates the Port Setup button.
Select
Setup
and configure the
Baud Rate
,
Data Bit
,
Stop Bit
, and
Parity
settings.
•
If any one of LAN1 through 16 has been selected as
the port, select the Port Setup button and configure
the network port setting.
•
If using a USB-serial port, the Text-In feature may
malfunction if the USB cable is removed while the
system is in operation.
●
Title
: Designate a name for the text-in device.
●
Actions
: Specify which actions to take when text-in is
detected.
–
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out
: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, SNS, Push, and/or Alert Window.
–
EventUpload:
Uploads the video clips when an
event occurs.
–
PTZ
: Moves the PTZ camera to a specific preset position
when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor when
an event occurs.
In order to use the Callback feature, the NVR must be
registered on the remote program.
Camera System
The event occurs when the fan has stopped in the fan
mounted camera.
●
No.
: Select which cameras to apply Fan Error to.
●
Actions
: Specify which actions to take when a Fan
Error event occurs.
–
Record
: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to
Event
or
Time & Event
mode, the selected
cameras will begin linked recording when an event
occurs.
–
Alarm-Out
: Designate event-triggered alarm-out
channels (each for the NVR and camera) and beeps.
–
Notify
: Configure to be notified of events by Mail,
LAN1 through 5, SNS, Push, and/or Alert Window.
–
EventUpload:
Uploads the video clips when an
event occurs.
–
PTZ
: Moves the PTZ camera to a specific preset
position when an event occurs.
–
Event Monitoring:
Selects the cameras to monitor
when an event occurs.
•
In order to use the Callback feature, the NVR
must be registered on the remote program.
•
In case of the camera that not supports camera
system event, the camera system feature will
be disabled.
