Part 2 - Configuration
30
●
Setup
: Exports current NVR settings or imports
existing settings. If the NetFS feature is in use, you can
export or import NVR settings in the registered FTP
site.
●
Import
: Decide whether to import network settings
as well. If you do not wish to change the current
network settings, do not select
Include Network
Setup
.
Selecting
Setup Import
does not change the settings
below.
•
Time-related settings (Date/Time, Time Zone, and
Use Daylight Saving Time)
•
Camera-related
Advanced Settings
settings
•
Camera-related
Stream
settings (Only if the
resolution is different from the camera in exporting)
●
Export
: Exports the current system settings to a
storage device connected to the system’s USB port or
the registered FTP site in NetFS. You can designate a
File Name
for the export file.
For USB flash memory devices, the NVR supports the
FAT32 file format only.
●
Show System Log
: Displays a searchable list of 5,000
most recent system log entries. For more information
on types of system log entries, refer to the
System
Log Types in the installation manual
. The
icon
appears next to log entries originating from a remote
source. To export the system log, select the
Export
at the bottom of the screen and then designate a file
name.
In order to display the system_log.txt file, you must
use the correct character encoding settings and use a
fixed-width font.
●
Clear All Data
: Erases all recording data. Selecting
Clear All Data
displays a confirmation window. Select
Clear
to proceed.
•
Before you perform
Clear All Data
, make sure you
are not accidentally deleting important data. Erased
data cannot be recovered.
•
Clear All Data
does not affect the system log.
Instead, the
Clear All Data
event will be added to
the log.
●
System Shutdown
: Shuts down the system. When
prompted, select
System Shutdown
.
