Part 2 - Configuration
46
gas station entrances at night, for example (Local
Exposure compensates for the bright light coming
from incoming vehicle headlights and makes it
possible to see the license plates). When setting to
the
Number-Identification
mode, some option
settings will be adjusted automatically, and you
cannot change them as long as the Setup Mode is not
changed.
●
Switching Level
: Controls the changing time of
daytime / nighttime mode, depending on the
Switching Level
between 1 to 10. The higher the
value is, day / nighttime mode is changed under
high-lighting conditions. Also the lower the value is,
day / nighttime mode is changed under low-lighting
conditions.
●
Mirror
: Select
Horizontal
or
Vertical
to flip the image
horizontally and/or vertically.
Select
Apply
after setting up a camera to see images
from the concerned camera on the left side of the
screen. Selecting
Apply
or
OK
displays a popup screen
that indicates whether the camera has been set up
successfully or not.
White Balance Options
●
Preset
: Use preconfigured white balance settings.
–
Auto
: Allow the system to adjust the white
balance automatically. The system will assess the
lighting conditions and adjust the white balance
automatically.
–
Incandescent - Fluorescent Cold
: Select a lighting
type to apply the appropriate white balance.
●
Manual
: Adjust the white balance manually. Adjust
Red and Blue gain values. Greater the value, greater
the intensity of the corresponding color.
Select
Apply
after setting up a camera to see images
from the concerned camera on the left side of the
screen. Selecting
Apply
or
OK
displays a popup screen
that indicates whether the camera has been set up
successfully or not.
