iDirect iQ Desktop+, Installation, Support, And Maintenance Manual

Page: 22 / 52

10 Installation, Support, and Maintenance Guide
iQ Satellite Router
iQ Satellite Router Rear Panel Description
3.3 iQ Satellite Router Rear Panel
Description
The iQ Satellite Router rear panel is shown in Figure 3-2 and defined in Table 3-2 on
page 10 .
Figure 3-2. Rear Panel Description
3.4 Detecting a Tx IFL Over-current Condition
Table 3-3 displays the LED status of the iQ when the TX IFL port detects a over-
current.
Table 3-2. iQ Satellite Router Rear Panel Connector Descriptions
Callout Label Interface Definition and Connector Type
6 TX L-Band Transmit signal to Block Up Converter (BUC)
capable of 10 MHz or 50 MHz Reference; 75 Ohm, F-
Type
7 Reset iQ internal reset button
8 RX L-Band Receive signal from Low Noise Block Down
Converter (LNB); 75 Ohm, F-Type
9 UART (Console) iQ console port, RJ-45
10 ETH1 Ethernet Communications Port, RJ-45
10/100/1000 Ethernet ports, 802.1q VLAN
11 ETH2 Ethernet Communications Port, RJ-45
10/100/1000 Ethernet ports, 802.1q VLAN
12 +24V DC Power
Supply
3.75A DC Power Inlet