iDirect iQ Desktop+ Installation, Support, And Maintenance Manual Download Page 11 | Manualshive

Page: 11 / 52

iDirect iQ Desktop+ Installation, Support, And Maintenance Manual Download Page 11

Installation, Support, and Maintenance Guide

xi

iQ Satellite Router

About

• Telephone: (703) 648.8111

[email protected]

iDirect and iDirect Government produce documentation that are technically accurate, easy to
use, and helpful to our customers. Please assist us in improving this document by providing
feedback. Send comments to:

• iDirect:

[email protected]

• iDirect Government:

[email protected]

For sales or product purchasing information contact iDirect Corporate Sales at the following
telephone number or e-mail address:

• Telephone: (703) 648.8000

• E-mail:

[email protected]

Warranty, RoHS, WEEE, Declaration of Conformity

Complete iDirect hardware product statements for the iQ Desktop Satellite Router are
available at these Web sites:

•

http://www.idirect.net/warranty

, for the hardware warranty

•

http://www.idirect.net/rohs

, for the RoHS statement of compliance

•

http://www.idirect.net/weee

, for the WEEE statement of compliance

•

http://www.idirect.net/doc

, for the Declaration of Conformity

«
...
9
10
11
12
13
...
»

Summary of Contents for iQ Desktop+





















































Reviews:

No comments