iDirect Evolution 8000 Series, Installation And Safety Manual

Page: 68 / 90

54 iDirect Evolution 8000 Series Satellite Router Installation and Safety Manual
Hardware Connections for a Mobile Remote
6.2 Hardware Connections for a Mobile Remote
A diagram depicting the iCONNEX e800 hardware connections is shown in Figure 27 .
Figure 27. iCONNEX e800 Hardware Connections Diagram
The diagram illustrates the connections needed from GPS receiver and the Handshake device
to the e800 iCONNEX HD-15 GPIO port. The signals shown in the figure have the following
meaning:
• MUTE = 1 the transmitter is muted
= 0 the transmitter is enabled
• TDM_LOCK_n = 0 when the receiver is locked
= 1 when the reciver is unlocked
• GPS-DATA is the data from the GPS receiver
The RJ-45 console port does not support GPS data input or antenna control handshaking
signals. These signals are supported by the HD-15 GPIO port.