14
Switching the unit on and off / Function check
Switching on
The Base Station is switched on by pressing the Enter button
until the unit switches on and all segments and lights are acti-
vated.
Press Enter to continue.
select person:
1
Select person number will be displayed.
The Handheld Device is activated by connecting it to the Base
Station. Make sure that the plug is properly installed.
3 seconds
Switching off
The Base Station is switched off by pressing the Enter button for
at least 3 seconds.
The Base Station will turn itself off, if it is not used for more than
one minute.
Function check
Perform a function control before each therapy and after inserting
the batteries.
• Make sure that the valve piston moves frictionless.
n n n n n n n n n n n
n n n n n n n n n n n
• Press the Enter button until the unit switches on and all
segments and lights are activated.
Afterwards
select person
1
will be displayed.
WARNING
Consult chapter ‚Problems and Solutions‘ on page 34, if:
• Not all of the lights switch on
• Lights seem weak or fading
• Nothing is visible on the display at all
• You see unknown signs
select person
1
Selection menu
Switch on the Base Station and use the UP an DOWN button to
select your personal number (1, 2, 3 or 4). Confirm the number by
pressing the Enter button. All further displays and entries will be
related to this personal number.
select menu
The Enter button opens the selection menu.
Use the UP and DOWN button to scroll through the selection
menu.
