DOC No: 7936 REV
D
represents years of fluid handling experience and we feel it is the finest product available
of its type.
The product you have purchased was designed and constructed for use within designated
limits and conditions. Staying within performance limits and following the guidelines given
in this manual will result in excellent performance and maximum life.
Should you have a question or a problem, technical assistance is available worldwide.
Micropump products are designed for easy field servicing with service kits and technical
support available for all products.
The Purpose of this Guide...
is to provide information to enable suitably qualified technicians and fitters to install,
operate and maintain the Micropump I-Drive and common pump/motor combinations.
Use the Guide...
when you have purchased a motor or pump/motor combination. This guide contains
specific information for installation, operation, and maintenance of the I-Drive and
references some of the most common pump/motor combinations. This guide should
be read in conjunction with the instructions provided with your specific pump. General
information is given on installation within a system, but reference should always be made
to instructions provided with ancillary equipment when installing the unit.
Abbreviations
The following abbreviations are used in this guide:
°C
Degrees Celsius
°F
Degrees Fahrenheit
EMC
Electromagnetic Compliance
DC
Direct Current
LVD
Low Voltage Directive
IOM Installation, Operation and Maintenance Manual
Max
Maximum
Min
Minimum
RPM
Revolutions Per Minute
SELV
Safety Electric Low Voltage
V
Volt(s)
W
Watt(s)
Bracket
/Flange
Power
Option
Driving
Magnet
Motor Options Code:
Product Labeling
Micropump products are labeled with a product code. The code describes the I-Drive
configuration. The first nine positions of the code describe the base configuration. The
remaining three positions in the code describe the optional features. Options that are not
used are not shown in the code. For pump/motor assemblies the product code consists of
the first four positions of the pump code with later positions describing the adaptor and/or
motor. Your Micropump distributor can provide additional information about the product
code.
Type
Series
Modifier
Rated
Torque
Speed
Range
Input
Power
Port
Fittings
Enclosure
Mount
Motor Code:
Your Micropump Product...
