DOC No: 7936 REV
D
STANDARD LIMITED WARRANTY
The products manufactured by Micropump Incorporated are warranted to be free
from defects in workmanship and material at the time of shipment from the place of
manufacture. Micropump will repair or replace, at its option, any part or component which
fails to conform to this warranty for a period of one year. Micropump’s obligation under
this warranty is limited to the repairs or replacement of defective equipment returned to
Micropump on an F.O.B. destination and freight-prepaid basis. All normal wear and tear
is excepted, and product is subject to examination at Micropump to verify that the parts or
components were defective at the time of sale.
For the purposes of the limited warranties, the “Stator/Controller Assembly” means
only the stator and the printed circuit board and electronic components contained in
the controller housing, plus the connecting control and power cables. The “Power
Supply Assembly” means only the printed circuit board and the electronic or mechanical
components located inside or on the power supply enclosure and the “Pump head
Assembly” means all other parts of the product, including but not limited to, the rotor.
No warranty of any kind is made or shall be imposed with respect to any pump or parts
(1) that have not been properly installed and tested in operation, (2) that have been
subject to misuse, negligence, acts of God or the elements, or any other form of casualty,
or (3) that have been repaired or altered outside Micropump’s facility in a way, so as, in
our judgment, to affect performance or reliability.
The parties agree that the buyer’s sole and exclusive remedy against Micropump shall
be for repair or replacement of defective parts under the conditions stated above. The
buyer agrees that no other remedy (including but not limited to incidental or consequential
damages for lost profits, lost sales, loss of use, injury to person or property, or any other
incidental or consequential loss) shall be available to them.
This warranty shall not apply to prototype pumps, experimental pumps, or brush-type
electric motors. Warranty of equipment or accessories from outside sources, purchased
by Micropump and incorporated into Micropump’s product is subject to the manufacturer’s
standard warranty, unless specifically agreed otherwise between Micropump and buyer.
A copy of the warranty on the aforementioned equipment is available on request.
The adjustment or replacement of defective parts made under this warranty will not
extend the original warranty period.
THE WARRANTY DESCRIBED ABOVE IS THE EXCLUSIVE
MICROPUMP WARRANTY AND IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE OR ANY WARRANTY PREVIOUSLY
ISSUED. WE NEITHER ASSUME NOR AUTHORIZE ANY PERSON
TO ASSUME FOR US ANY OTHER LIABILITY IN CONNECTION
WITH THE SALE OR USE OF OUR EQUIPMENT.
