Document Version 1.0
Last revised on
2018-‐10-‐22
Page 68 of 79
Reference Manual for uTrust 5501 F Reader/Writer Module
6.3.5.3.
CONTACT_EMV_SINGLEMODE
This escape command allows the host to perform a one-‐shot EMV loop-‐back application, as specified
in the EMV Level 1 Testing Requirements document.
Input
:
Byte0
Escape code(0x06)
Output
:
Output buffer
NULL
6.3.5.4.
CONTACT_EMV_TIMERMODE
This escape command allows the host to perform a timer mode EMV loop-‐back application, as
specified in the EMV Level 1 Testing Requirements document.
Input:
The input buffer contains the escape code value.
Byte0
Escape code(0x07)
Output
:
Output buffer
NULL
6.3.5.5.
CONTACT_APDU_TRANSFER
This escape command exchanges a short APDU with the smart card. The user has to ensure that a
card is inserted and powered before issuing this escape command.
This escape command is typically used by the MCard API to access synchronous memory cards.
Input:
The input buffer contains the escape code value followed by the short APDU to be sent to the card.
Byte0
Byte1 onwards
Escape code(0x08)
Short APDU to be sent to card
Output
:
