Operating Instructions
IDEM Safety Switches
UGB-NET-CS
102620 2210 UGB-NET-CS Operating Instructions
7
4.
Configure the required IP address setting in the pop-up window and click OK.
5.
Open an internet browser and type in the IP address of the UGB-NET.
6.
Navigate to ‘Configuration’ under the ‘NETWORK’ menu.
7.
Set DHCP to
‘Disabled’ and click ‘Save settings’
8.
Cycle power to the UGB-NET or press and hold the reset button until the LEDs turn red then release to
reset the device. The UGB-NET will restart with the configured IP address and with DHCP disabled.
