47
11.2
Answer Mode
The phone comes with two pre-recorded outgoing messages (OGM) for
the respective answer modes: ANSWER ONLY and ANSW. &RECORD.
By default, the answer mode is ANSW.&RECORD, which allows a caller to
leave a message on the answering machine after hearing the
announcement. This can be changed to ANSWER ONLY mode, which
does not allow callers to leave any messages on the answering machine
after hearing the announcement.
11.2.1
Set Answer Mode
1.
From the home screen, press
M
.
2.
Press
+
/
-
to ANSW MACHINE and then press
M
to select.
3.
Press
+
/
-
to ANSWER MODE and then press
M
to select.
4.
Press
+
/
-
to select ANSWER ONLY or ANSW.&RECORD
and then press
M
to confirm.
•
A confirmation tone is played.
5.
Press
O
to return to standby mode.
11.3
Answering Machine Settings
11.3.1
Set the Ring Delay
You can select the number of rings before the answering machine
answers a call and starts playing the outgoing message (OGM).
You can set the delay from 2 to 7 rings, or ECONOMY.
IMPORTANT: If your network voice messaging system is enabled, you
must set your RING DELAY to less than 6 rings; otherwise the network
service will answer all your calls before the answering machine of your
telephone and prevent it from recording any messages.
1.
From the home screen, press
M
.
2.
Press
+
/
-
to ANSW MACHINE and then press
M
to select.
3.
Press
+
/
-
to SETTINGS and then press
M
to select.
4.
Press
M
to select RING DELAY.
5.
Press
+
/
-
to select 2 RINGS – 7 RINGS or ECONOMY and
then
press
M
to confirm.
•
A confirmation tone is played.
6.
Press
O
to return to standby mode.
Note: If you select ECONOMY, the answering machine will answer an
