21
4.5
Adjust Speaker Volume
There are 5 levels of speaker volume.
1.
During a call, press
+
/
-
to select from VOLUME 1 to VOLUME 5.
•
The current setting is shown.
•
When you end the call, the setting will remain at the last
selected level.
4.6
Muting the Microphone
When the microphone is muted, the handset displays MUTE ON, and
your caller cannot hear you.
1.
During a call, press
m
to turn on/off the microphone.
4.7
Paging
The paging feature enables you to locate a missing handset if the handset
is in range and contains charged batteries.
1.
Press the
key under the base unit.
•
All the registered handsets that are in range will start to ring.
You can stop the paging by pressing any key on a handset or the
key
under the base unit again.
4.8
Handset Power On/Off
Press and hold
O
for more than 2 seconds to switch the handset on or
off in standby mode.
•
When first turned on, the display shows
SEARCHING…
until the
handset finds the base.
Note: You can switch the handset off to save battery life, if the handset is
not on the base or a charging cradle and you do not want to use it for a
while.
IMPORTANT: When the handset is OFF, it cannot be used for making calls
including emergency calls. It will not ring when there is an incoming call.
To answer a call, you will need to switch it back on and it may take some
time for the handset to re-establish a radio link with the base unit.
